Forged Fittings Weight Chart

Table of Contents

Forged Fittings Weight Calculator

A Forged Fittings Weight Chart is probably needed to obtain an accurate estimate of materials, conduct a structural evaluation, and ensure adherence to Industrial Forged Fittings. Engineers use SS Forged Fittings Weight Charts calculations to ensure that loads are distributed properly and that Stainless Steel Forged Fittings are fabricated correctly. The chart of the weight of the Forged Fittings assists the extensive analysis of the weight of the system to ensure safe transportation and installation. In the case of mild steel use, an ms forged fittings dimensions chart is used to ensure dimensional consistency and pressure rating in accordance with the global standards. A properly organized ms fittings catalogue also makes the procurement process easier, as it offers better specification compatibility information.

Forged Fittings Weight Chart in Kg, Pdf, and MM

Forged fittings weight chart in kg, Forged fittings weight chart Calculator, Forged fittings weight chart in PDF, Steel forged fittings weight chart, Forged fittings weight chart india, Pipe fittings Weight Chart in kg PDF, Socket Weld Fittings Dimensions pdf, Class 3000 fittings pressure rating, Pipe Union Dimensions Chart

Socket Weld Fittings Weight Chart

Size	Union	Half Couplings	Couplings	Cap	Tee	45 Elbow	90 Elbow
1/2	0.13	0.13	0.13	0.10	0.29	0.20	0.22
3/4	0.49	0.21	0.17	0.16	0.42	0.28	0.33
1	0.81	0.30	0.29	0.25	0.65	0.42	0.53
1 1/4	1.10	0.34	0.45	0.45	1.04	0.69	0.84
1 1/2	1.61	0.66	0.59	0.59	1.35	0.80	1.08
2	2.16	1.09	0.86	0.96	2.04	1.35	1.68
2 1/2	3.50	1.63	1.40	1.43	3.98	2.53	3.20
3	5.15	2.10	1.78	2.74	5.90	5.10	5.38

Class 6000 Socket Weld Fittings Weight

Size	Union	Half Couplings	Couplings	Cap	Tee	45 Deg Elbow	90 Deg Elbow
1/2	0.21	0.21	0.24	0.16	0.56	0.36	0.40
3/4	0.31	0.31	0.27	0.23	0.94	0.57	0.73
1	0.51	0.51	0.44	0.36	1.49	0.92	1.17
1 1/4	0.75	0.75	0.60	0.64	1.93	1.11	1.48
1 1/2	1.25	1.25	1.11	0.94	3.37	2.01	2.79
2	1.92	1.92	1.62	1.41	3.95	2.90	3.28
2 1/2	6.37	1.42	1.42	2.39	6.90	3.81	5.48
3	–	1.75	1.75	3.51	11.48	5.47	9.62

Class 3000 Threaded Fittings Weight Chart

Size	Union	Half Couplings	Couplings	Cap	Tee	45 Deg Elbow	90 Deg Elbow	Hex Plug
1/2	0.34	0.6	0.06	0.11	0.56	0.34	0.43	0.07
3/4	0.48	0.10	0.10	0.18	0.92	0.56	0.69	0.14
1	0.77	0.23	0.23	0.37	1.49	0.94	1.14	0.22
1 1/4	1.03	0.34	0.34	0.62	1.76	1.03	1.42	0.44
1 1/2	1.63	0.54	0.54	0.72	3.27	2.05	2.63	0.59
2	2.43	0.70	0.70	1.09	3.53	2.23	2.92	1.03
2 1/2	3.63	1.13	1.13	2.22	6.99	3.71	5.99	1.80
3	5.27	1.68	1.68	3.50	10.19	5.97	8.88	2.60

Class 6000 Threaded Fittings Weight in KG

Size	Union	Half Couplings	Couplings	Cap	Tee	45 Deg Elbow	90 Deg Elbow	Hex Plug
1/2	0.62	0.16	0.32	0.26	0.98	0.63	0.80	0.07
3/4	0.92	0.22	0.44	0.40	1.65	1.07	1.31	0.14
1	1.45	0.43	0.86	0.51	2.17	1.27	1.61	0.22
1 1/4	1.79	0.92	1.04	0.71	3.74	2.27	2.93	0.44
1 1/2	3.02	1.16	1.87	1.40	4.71	2.54	3.79	0.59
2	4.62	1.73	2.81	2.06	7.88	4.37	7.31	1.03
2 1/2	6.37	2.37	4.21	3.35	13.11	7.01	9.88	1.80
3	–	3.43	6.21	5.16	22.50	14.16	16.43	2.60

Forged Fitting ASME B16.11 Weight Chart

Pipe Size	A	B	QTY	Weight Chart
¼	0.81	0.88	160	0.20
⁄	0.97	1.00	130	0.26
½	1.12	1.31	100	0.57
¾	1.31	1.5	75	0.71
1	1.5	1.81	40	1.08
1 ¼	1.75	2.19	25	1.68
1 ½	2.00	2.44	18	2.38
2	2.38	2.97	10	3.55
2 ½	3.00	3.62	4	6.22
3	3.38	4.31	2	10.36
4	4.19	5.75	1	23.91

ASME B16.11 Threaded Fittings Size Chart

NPS	Minimum Length of Thread	OD of Band D	Center to End A	Minimum Wall Thick.
1/2	10.9	13.6	33	28	3.18
3/4	12.7	13.9	38	33	3.18
1	14.7	17.3	46	38	3.68
1 ¼	17	18	56	44	3.89
1 ½	17.8	18.4	62	51	4.01
2	19	19.2	75	60	4.27
2 ½	23.6	28.9	92	76	5.61
3	25.9	30.5	109	86	5.99
4	27.7	33	146	106	6.55